Company Details

Shijiazhuang Longshu Mechanical & Electrical Equipment Trading Co., Ltd. [Hebei,China] Business Type:Manufacturer , Trade Company Main Markets: Americas , Asia , Europe , Middle East , Other Markets , Worldwide Exporter:11% - 20% Certs:BRC, ISO9001

Language

SKF Cylindrical Roller Bearing NU220 roller bearing

2022-06-01

Cylindrical Roller Bearing
Cylindrical rollers and raceways are linear contact bearings. Load capacity, mainly bear radial load. The friction between the rolling element and the rib of the ring is small, which is suitable for high-speed rotation. According to whether the ring has ribs or not, it can be divided into single row cylindrical roller bearings such as NU, NJ, NUP, N, NF, and double row cylindrical roller bearings such as NNU and NN. The bearing is a structure in which the inner ring and the outer ring can be separated.
Cylindrical roller bearings without ribs on the inner or outer ring, the inner and outer rings can move relative to the axial direction, so they can be used as free end bearings. Cylindrical roller bearings with double ribs on one side of the inner ring and outer ring and a single rib on the other side of the ring can withstand a certain degree of axial load in one direction. Generally, a steel stamping cage is used, or a copper alloy turning solid cage is used. However, there are also part of the use of polyamide forming cage.
Features
1. The roller and the raceway are in line contact or trimmed line contact, and the radial bearing capacity is large, which is suitable for bearing heavy loads and impact loads.
2. The friction coefficient is small, suitable for high speed, and the limit speed is close to that of deep groove ball bearings.
3. N type and NU type can move axially, can adapt to the change of relative position between shaft and shell caused by thermal expansion or installation error, and can be used as free end support.
4. The processing requirements for the shaft or seat hole are relatively high. After the bearing is installed, the relative deflection of the outer ring axis should be strictly controlled to avoid contact stress concentration.
5. The inner ring or outer ring can be separated for easy installation and removal.

Previous: Why do bearings rust? How to prevent bearings from rusting? Next: Wholesale Car Auto Wheel Hub Bearing DAC5378 Original

Ms. Cynathia Li

Email:

admin@longshubearing.com

Send Inquiry

Tel:86-311-86831973

Fax:86-311-86831973

Email:admin@longshubearing.com

Address:4 Floor No.10 Dinxin Hardware Market ,Changan District., Shijiazhuang, Hebei, Shijiazhuang, Hebei